Forum Sava Cell™


 
IndeksFAQPencarianPendaftaranLogin

Share | 
 

 JVM Error Codes

Topik sebelumnya Topik selanjutnya Go down 
PengirimMessage
avatar
Pronetto
Donatur
Donatur

Jumlah posting : 184
Reputasi 10
Join date : 18.01.11

PostSubyek: JVM Error Codes   Tue Apr 19, 2011 12:04 am
101 Previous startup failed
The device has been reset during the JVM boot process. This error indicates that the JVM found the "boot in progress" flag was set on startup. The screen is intended to break continuous reset loops so that corrective action can be taken

102 Invalid code in filesystem
The system has checked the .COD files in the handheld for modification, and determined that there is a problem with one or more .COD files. If all loads fail, it could indicate a build process error where there was a problem signing the codfiles. If some user action to the device caused this problem, the reset cycle will be continuous since the code in the filesystem has been corrupted. The only recovery method is to wipe the device and restore a new system

103 Cannot find starting address
The starting address for the boot .COD file cannot be found. This may indicate that a boot .COD file has not been installed on the device, or that its format is invalid or corrupt

104 Uncaught: <Java-type-name>
An uncaught Java exception was thrown by the Java code and diagnosed by the JVM. Execution can be continued, or the handheld can be attached to a debugger on a desktop through a serial or USB cable. The event log should contain the traceback of the thrown exception.

105 Example, DbRecSize( %d ) -> %d
The file system API has returned an error status for a certain operation. This could indicate a corrupt filesystem or an error in the JVM

106 Graphics system error
An error has been detected in the graphics system of the device

107 operator new() called A
C++ class in the JVM has not been coded correctly to inherit from VMRamObject that has the correct override for operator new. Extract the current (post-reset) BUGDISP

108 operator delete() called A
C++ class in the JVM has not been coded correctly to inherit from VMRamObject that has the correct override for operator delete. Extract the current (post-reset) BUGDISP

109 PriorityMessageCount error: <priority-count>
The value returned by RimPriorityMessageCount is negative when it should always be greater than or equal to zero. This indicates an error in the OS code. Extract the current (post-reset) BUGDISP and EVENTLOG

110 Non-idle event downtime error: <down-time> <idle-down-time>
A problem has been detected in the accumulation of JVM down time, which represents how long the JVM has been idle. This usually indicates an error in the handheld firmware or the JVM. This could also occur if the tick count rolls over after 400+ days of device time

111 Font engine error
An error has been detected in the font engine system of the device. Extract the current (post-reset) BUGDISP and EVENTLOG

112 Java Native Assertion Failure
An error has been detected in the Java native code. Extract the current (post-reset) BUGDISP and EVENTLOG

200 Application manager threw an uncaught exception
The application manager event thread threw an uncaught exception and so cannot continue execution

201 Crypto initialization code failed
The initialization of the crypto system failed and the handheld cannot continue execution

202 An attack on the key store has been detected
The attack has been detected and execution cannot continue.

203 Console process died
The application manager console process (usually the Ribbon) has died. This is likely due to an uncaught exception during execution.

204 Persistent Content Exception
An application tried to commit a plaintext object to the Persistent Store. This will only happen if Content Protection is on and a process tries to save something in the PersistentStore that is marked as plaintext. Since this exception was not handled, the persistent store is in a bad state.

300-303 Bad load
Run Application Loader to reload the operating system and applications onto the handheld

395 Unclassified error code

400-564 Page faults
Run Application Loader to reload the operating system and applications onto the handheld

310-314 Hardware failure
Perform a hard reset on the handheld: Shut down, remove the battery wait a few second,replace battery then see when happens when it starts or
Run Application Loader to reload the operating system and applications onto the handheld

320-325 AMX failure
Run Application Loader to reload the operating system and applications onto the handheld

330-339 Application tasks failure
Run Application Loader to reload the operating system and applications onto the handheld

340-343 Memory failure

350-359 Software application failure

360-363 Flash memory failure
Run Application Loader to reload the operating system and applications onto the handheld

365-368 This one is often followed by "OHHH @&#%!!"

410 Radio failure
Run Application Loader to reload the operating system and applications onto the handheld

507 No applications on handheld
Reflash handheld

501 VM_THREAD_SWITCHED:
Internal Error This is an error return used internally in the VM. It should never be reported as a device error
Kembali Ke Atas Go down
avatar
Pronetto
Donatur
Donatur

Jumlah posting : 184
Reputasi 10
Join date : 18.01.11

PostSubyek: Re: JVM Error Codes   Tue Apr 19, 2011 12:05 am
502 VM_PROCESS_DEATH:
All processes exited The last Java process has terminated. There is nothing left to execute

503 VM_THREAD_DEATH:
Internal Error This is an error return used internally in the VM. It should never be reported as a device error

504 VM_THREAD_SWITCH:
Internal Error This is an error return used internally in the VM. It should never be reported as a device error

505 VM_BAD_CODE: Bad Byte Code
An error has occurred in the JIT compiler

506 Uncaught Exception
An uncaught Java exception was thrown in the initial VM Java thread thus ending the only live thread in the system. The eventlog contains the traceback for the exception

507 Unsatisfied Link
A dependency on a .COD file could not be satisfied because the .COD file is missing

508 Invalid object
A problem has been detected with a debugger command to the VM

509 VM_PPO_INFINITE_LOOP: infinite loop in PPO phase of GC
The maximum iteration count for the PPO phase of a GC must be the maximum number of file handles in the system. This error indicates that the iteration count has exceeded that count and hence there is a flaw in the PPO loop or a corrupted file system. The extra hex integer in the error string is the flash id of the current record where the infinite loop was detected

510 Deadlock
All threads are waiting on objects, resulting in deadlock. The system cannot recover from this state because no thread can release a lock

511 Debug connection died A
problem has occurred while debugging that may be caused by a VM problem or an incorrect debugging command being sent to the VM

512 GC Aborted
An idle garbage collection has been interrupted by a user event, such as pressing the keyboard or moving the trackwheel

513 <clinit> needs running
An opcode requires that a class <clinit> execute before it can continue execution

514 <init> needs running
A new instance of a class has been allocated and it must be initialized by the default constructor before it can be used

515 Object group too big
The reachable objects form a group that cannot be represented properly by the JVM because either there are too many objects or the total size of the objects is too large

516 Persistent ids exhausted
When committing a persistent object, the JVM found that the persistent store id counter has reached its limit. The object was not committed and a critical error was reported. This error should never happen unless a device is heavily used for years

517 Filesystem corrupt
An inconsistency has been detected in the JVM persistent object store

518 Unexpected longjmp
A garbage collection marking phase was terminated via a longjmp. This indicates that the marking phase was interrupted when it should have completed without interruption. This should never happen because these actions are executed when the device is not idle, and GCs can only be interrupted when the device is idle

519 Internal Error
The JVM host is missing or has been disabled

520 Internal Return
An internal state that indicates a Java method return needs to be executed

521 Dangerous Wait
An Object.wait() has been executed by a thread that holds a lock on another object. This is only checked in the simulator under the control of the JvmDebugWaits application switch

522 Interlaced synchronization
A thread has acquired two locks on objects in an order that doesn't match the order that previous locks for the two types were acquired. This indicates a future potential deadlock situation and is reported. The check is only available in the simulator under the control of the JvmDebugLocks application switch

523 System process died
A critical Java process has terminated, and the device cannot continue to operate in a normal manner

524 LMM error
An object has been marked as recovered by the Low Memory Manager, but it was not freed during a garbage collection. This is only checked in the simulator under the control of the JvmDebugLMM application switch

525 Bad persistent object
An auto-commit operation during a garbage collection has detected a non-persistent object reachable from the persistent store root. The type of the object has been output into the eventlog

526 java.lang.Object not found
The class definition for java.lang.Object cannot be found

527 java.lang.String not found
The class definition for java.lang.String cannot be found

528 Corrupt filesystem
Unrecoverable. All data will be lost
Kembali Ke Atas Go down
avatar
Pronetto
Donatur
Donatur

Jumlah posting : 184
Reputasi 10
Join date : 18.01.11

PostSubyek: Re: JVM Error Codes   Tue Apr 19, 2011 12:05 am
101 Internal JVM error.

102 Invalid code in file system. The .cod files in the handheld have been checked for modification and it has been determined that there is a problem with one or more .cod files.

103 The starting address for the boot .cod file cannot be found. This might mean that a boot .cod file has not been installed on the handheld, or that its format is invalid or corrupt.

104 An uncaught Java exception was thrown in the Java code and diagnosed by the JVM. Execution can be continued or the handheld can be attached to a debugger on a desktop through a serial or USB cable. The event log should contain the traceback of the thrown exception.

105 An OS file system API returned an error status for a certain operation. This can indicate a corrupt file system or an error in the JVM.

106 An error has been detected in the graphics system of the handheld.

107 Internal JVM error.

108 Internal JVM error.

109 Internal OS error.

110 Non-idle event downtime error. A problem has been detected in the accumulation of JVM down time that represents how long the JVM has been idle. This indicates an error in either the OS code or the JVM code.

200 Application manager threw an uncaught exception. The application manager event thread threw an uncaught exception and so cannot continue running.

201 Initialization of the cryptographic system failed and the handheld cannot continue to operate.

202 An attack on the key store has been detected, and the handheld cannot continue to operate.

203 The application manager console process, usually the Home screen ribbon, has failed, like due to an uncaught exception.

501 Internal error.

502 All processes exited. The last Java process has terminated, and there is nothing left to execute.

503 Internal error.

504 Internal error.

505 Internal error.

506 An uncaught Java exception was thrown in the initial VM Java thread thus killing the only live thread in the system. The event log contains the traceback for the exception.

507 A dependency on a .cod file could not be satisfied due to a missing .cod file. Load the missing .cod file onto the handheld.

508 Invalid object. A problem has been detected with a debugger command to the VM.

516 Error occurred during garbage collection, which might indicate a corrupted file system.

510 All threads are waiting on objects, which results in a deadlock. The system cannot recover from this state since no thread can release a lock.

511 A problem has occurred during debugging.

515 The reachable objects form a group that cannot be represented properly by the VM because there are too many objects or the total size of the objects is too large.

516 When committing a persistent object, the VM found that the persistent store id counter has reached its limit. The object was not committed.

517 An inconsistency has been detected in the VM persistent object store.

518 Internal error.

519 Internal error.

520 Internal error.

521 Indicates that Object.wait() has been executed by a thread that holds a lock on another object; occurs only in simulator if the JvmDebugWaits application switch.

522 A thread has acquired two locks on objects in an order that doesn’t match the order that previous locks for the two types were acquired, which indicates a future potential deadlock situation; reported only in the simulator when the JvmDebugLocks application switch is set.

523 A critical Java process has died and the device cannot continue to operate normally.

524 An object has been marked as recovered by the Low Memory Manager but it was not freed during a garbage collection. This is only checked in the simulator under the control of the JvmDebugLMM application switch.

525 Bad persistent object. An auto-commit operation during a garbage collection has detected a non-persistent object reachable from the persistent store root. The type of the object has been output into the event log.

526 The class definition for java.lang.Object cannot be found.

527 The class definition for java.lang.String cannot be found.

528 The file system is corrupted. Data on the handheld is unrecoverable.

529 The file system is corrupted. An attempt is going to be made to recover data, but some data might be lost.

530 Internal JVM error.

531 Flash memory has been exhausted.

532 A JVM assertion has been violated. This error can occur only in the simulator, not on an actual handheld.
alam_maniez Sedang Offline Reply With Quote
Kembali Ke Atas Go down
avatar
Pronetto
Donatur
Donatur

Jumlah posting : 184
Reputasi 10
Join date : 18.01.11

PostSubyek: Re: JVM Error Codes   Tue Apr 19, 2011 12:06 am
300-303 Bad load
Run Application Loader to reload the operating system and applications onto the handheld.

395 Unclassified error code
You receive the following error message on the handheld:
Device Error 395

Cause
Device Error 395 is an unclassified error code. This error can be caused by a third party application installed on the handheld.

Resolution 1
Perform a hard reset on the handheld: Shut down, remove the battery wait a few second... replace battery then see when happens when it starts.

Resolution 2
Erase and reload the data on the handheld.
1. In BlackBerry Desktop Manager, use the Backup and Restore tool to create a backup file of the data on your handheld. For instructions, see ?Back up handheld information? in the Desktop Manager Online Help.Warning: The following steps will erase the data on the handheld.
2. In BlackBerry Desktop Manager, double-click the Application Loader icon.
3. Click Next. The Handheld Application Selection window appears.
4. Verify that the correct applications are selected, then click Next.
5. Click Advanced.
6. Select the option for Erase all application data and Erase all currently installed applications, then click Next.
7. Click Finish. The data on the handheld is erased, while the operating system and applications are reloaded onto the handheld.
8. Use the Backup and Restore tool to restore to the handheld the data saved in the backup file. For instructions, see ?Restore handheld information? in the Desktop Manager Online Help.

400-564 Page faults
Run Application Loader to reload the operating system and applications onto the handheld.

310-314 Hardware failure
Perform a hard reset on the handheld: Shut down, remove the battery wait a few second... replace battery then see when happens when it starts.

OR

Run Application Loader to reload the operating system and applications onto the handheld.
Note: If these tasks do not resolve the error, contact your service provider.

320-325 AMX failure
Run Application Loader to reload the operating system and applications onto the handheld.

330-339 Application tasks failure
Run Application Loader to reload the operating system and applications onto the handheld.

340-343 Memory failure
You receive one the following error messages on your handheld:
Device Error 340
Device Error 341
Device Error 342
Device Error 343

Cause
Memory failure.

Resolution
Reduce the number of calendar appointments synchronized to your handheld.
1. In BlackBerry? Desktop Manager, double-click the Intellisync icon.
Click Configure PIM. The Handheld Configuration window appears.
2. In the Handheld Applications list, select Calendar.
3. Click Configure > Advanced Settings. The Advanced Settings for Calendar window appears.
4. In the Date Range tab, perform one of the following tasks to reduce the number of calendar appointments synchronized to your handheld:
If you click the Transfer only Future items option, only future calendar appointments will be synchronzied to your handheld.
If you click the Transfer items within a range of Days option and enter date range in the fields provided, only the calendar appointments that scheduled within the date range will be synchronized to your handheld.
5. Click OK to save your changes and close the window.
6. In the Handheld Configuration window, ensure that the check box beside the Calendar application is selected, then click OK.
7. In the Intellisync window, ensure that the Synchronize PIM check box is selected, then click Synchronize Now. The number of calendar entries on your handheld is reduced.

If you still receive the error
Run Application Loader to reload the operating system and applications onto your handheld.

350-359 Software application failure
You receive one of the following error messages on your handheld:
Device Error 350
Device Error 352
Device Error 353
Device Error 354
Device Error 355
Device Error 356
Device Error 357
Device Error 358
Device Error 359

Cause :
Software application failure.
Resolution
Perform a hard reset on the handheld.

OR

Run Application Loader to reload the operating system and applications onto your handheld. In the Application Loader Wizard window, do not select any third party applications. In the Advanced options, select the Erase all currently installed applications check box

360-363 Flash memory failure
Run Application Loader to reload the operating system and applications onto the handheld.

365-368 This one is often followed by "OHHH @&#%!!"
Contact your service provider.

410 Radio failure
Run Application Loader to reload the operating system and applications onto the handheld.
Note: If this task does not resolve the error, contact your service provider.

507 No applications on handheld
You receive one of the following errors on your BlackBerry device while using Application Loader to install device software:

Device Error 505

Device Error 507

Both errors indicate that no applications are loaded on the BlackBerry device.

Cause 1
During the Application Loader process, the existing applications on the BlackBerry device were erased, but Application Loader failed to load the new applications.

Resolution
Complete the following steps:
1. Verify that device software is installed on your computer.
2. If your BlackBerry device is connected to a laptop in a docking station, disconnect the laptop from the docking station and connect the device directly to the laptop.
3. If a third-party program (e.g. virus scanner) is using the same COM port as BlackBerry Desktop Manager, close the third-party application to free the COM port.
4. If you are using a USB adapter to connect your BlackBerry device to a serial port on your computer, temporarily connect your device to a computer with a USB port.
5. In Desktop Manager, double-click Application Loader.
6. Use Application Loader to install the device software.

Cause 2
You erased all the data and applications on your BlackBerry device by typing an incorrect password ten times in Application Loader.

Resolution :
Complete the following steps:
1?In Desktop Manager, double-click Application Loader.
2?Use Application Loader to install the device software

VM error code 513
Overview
After typing an incorrect password ten times and restarting the BlackBerry smartphone, the following error appears:

JVM error 513
Cause
All of the data and applications on the BlackBerryÿsmartphone have been deleted.

Resolution
Re-install BlackBerry? Device Software on the BlackBerry smartphone and restore the dataÿfrom a backup file (if available).

NOTE
For instructions on how to install BlackBerry Device Software, see KB03621.
For instructions on how to restore data from a backup file, see KB10339.

Error code 523
JVM523 is the result of an icon/program loaded on your blackberry that is not compatible with your current theme.
You'll notice that you only get the JVM error when you scroll to a certain icon.
First, figure out which icon causes the error. just scroll until your BB resets.
For instance, Now that we have figured it out, we have some options.
using eMSN as an example, as it was the defective program blackberry 7100i. Replace eMSN in the following steps to whichever program gives you the trouble.

1- change your theme to something that supports the icon.
But what if your "options" icon is passed your eMSN icon? And everytime you try to get to "options" your BB resets?
no problem, hold the SHIFT key and scroll down. this will bypass the entire line of icons. Also very useful to scroll to the bottom quickly. Now you should be able to get to your Options to change your theme.

*it also might be wise to set up your CONVENIENCE KEY (the one between the send/end buttons on your keypad) to be a shortcut to your Options. This can be achieved by going to your Options: Screen/Keyboard: Convenience Key Opens: Options.

***Many themes did not support eMSN, so you might have to keep changing themes until you find one that DOES support it. This is why its a good idea to set up your convenience key to OPTIONS, to get faster results. (Your convenience key is the black key with the white stripe in it - which is located between the GREEN "send" key and the RED "end key"

2-HIDE the icon. Scroll to the eMSN icon, hit the SHIFT key and then CLICK the scroll wheel. This brings up the option to hide the program.

3-DELETE PROGRAM. Once again you have to get to your Options: Advanced: Applications: Highlight eMSN: Click Scroll Wheel: Delete.
Kembali Ke Atas Go down

Sponsored content



PostSubyek: Re: JVM Error Codes   
Kembali Ke Atas Go down
 

JVM Error Codes

Topik sebelumnya Topik selanjutnya Kembali Ke Atas 
Halaman 1 dari 1

Permissions in this forum:Anda tidak dapat menjawab topik
Forum Sava Cell™ :: Mobile Phones :: Blackberry-
Navigasi: